Recently, when we were writing our book *Numericon*, we came across what has now become one of our very favourite numbers: *Graham's number*. One of the reasons we love it is that this number is big. Actually, that's an understatement. Graham's number is mind-bendingly huge.

The observable Universe is big, but Graham's number is bigger. Image: ESA and the Planck Collaboration.

Our new favourite number is bigger than the age of the Universe, whether measured in years (approximately 14 billion years) or seconds (4.343x10^{17} seconds). It's bigger than *Avogadro's number*, a sizeable 6.02214129 x 10^{23}. This is the number of hydrogen atoms in 1 gram of hydrogen, which is called a mole and is the standard unit for measuring an amount of a substance in chemistry or physics.

Graham's number is bigger the number of atoms in the observable Universe, which is thought to be between 10^{78} and 10^{82}. It's bigger than the 48th Mersenne prime,

2^{57,885,161}-1,

the biggest prime number we know, which has an impressive 17,425,170 digits. And it's bigger than the famous *googol*, 10^{100} (a 1 followed by 100 zeroes), which was defined in 1929 by American mathematician Edward Kasner and named by his nine-year-old nephew, Milton Sirotta. (This might sound familiar, as Google was named after this number, though they got the spelling wrong.)

Graham's number is also bigger than a *googolplex*, which Milton initially defined as a 1, followed by writing zeroes until you get tired, but is now commonly accepted to be 10^{googol}=10^{(10100)}. A googleplex is significantly larger than the 48th Mersenne prime. You, or rather a computer, can write out the 48th Mersenne prime in its entirety, all 17,425,170 digits of it. But, despite the fact that I can tell you what any digit in the googolplex is (the first is a 1, the rest are all 0), no person, no computer, no civilisation will ever be able to write it out in full. This is because there is not enough room in the Universe to write down all googol+1 digits of a googolplex. As Kasner, and his colleague James Newman, said of the googolplex (in their wonderful 1940s book *Mathematics and the imagination* which introduced the world to these numbers): "You will get some idea of the size of this very large but finite number from the fact that there would not be enough room to write it, if you went to the farthest star, touring all the nebulae and putting down zeros every inch of the way."

Graham's number is bigger than the googolplex. It's so big, the Universe does not contain enough stuff on which to write its digits: it's literally too big to write. But this number is finite, it's also an whole number, and despite it being so mind-bogglingly huge we know it is divisible by 3 and ends in a 7.

### A big party

The origins of Graham's number go back to 1928 when a brilliant young mathematician, Frank Ramsey, noticed a surprising thing when he was working on a paper about logic: complete disorder seemed to be impossible. No matter how complicated your system looks, pockets of order of any size are always guaranteed to be there if the system is large enough.

This result, which was just a small part of the particular paper he was working on, was the start of a whole new field of mathematics called *Ramsey Theory*. This area of maths is often explained with the example of a party. Suppose you're having a party and you want to make sure you invite a good mix of people and decide to keep track of who knows who. Suppose you draw a map of the relationships of all your friends, linking two people with a blue edge if they are friends and with a red edge if they are strangers. Then you might end up with something like this:

Now this looks pretty complicated and it would take quite a lot of information to describe who is connected by red edges and who is connected by blue edges. But if you zoom in on just Ann, Bryan and David, they are all joined by red edges. This red triangle is an example of order hiding in the messy overall network. The more ordered a system is, the simpler its description. The most ordered friendship network is one that has all the edges the same colour: that is, everyone is friends or everyone is strangers.

Ramsey discovered that no matter how much order you were looking for – whether it was three people who were all friends and strangers or twenty people who were all friends and strangers – you were guaranteed to find it as long as the system you were looking in was large enough. To guarantee yourself a group of three people who are all friends or all strangers you need a friendship network of six people: five people isn't enough as this counterexample shows.

The number of people you need to guarantee that you'll find three friends or three strangers is called the Ramsey number *R(3,3)*. We know a few Ramsey numbers: we've seen that *R(3,3)=6*, and it has been proved that *R(4,4)*, the number of people you need to guarantee you'll find four friends or four strangers, is 18. But we hit a wall very quickly. For example we don't know what *R(5,5)* is. We know it's somewhere between 43 and 49 but that's as close as we can get for now.

Part of the problem is that numbers in Ramsey theory grow incredibly large very quickly. If we are looking at the relationships between three people, our network has just three edges and there are a reasonable 2^{3} possible ways of colouring the network. For four people there are six edges and 2^{6}=64 possible colourings. But for the relationships between six people there are fifteen edges and we already have to consider an unwieldy 2^{15}=32,768 possible colourings. Mathematicians are fairly certain that *R(5,5)* is equal to 43 but haven't found a way to prove it. One option would be to check all the possible colourings for a network of 43 people. But each of these has 903 edges, so you'd have to check through all of the 2^{903} possible colourings – more colourings than there are atoms in the observable Universe!

### Too big to write but not too big for Graham

Big numbers have always been a part of Ramsey theory but in 1971 mathematician Ronald Graham came up with a number that dwarfed all before it. He established an upper bound for a problem in the area that was, at the time, the biggest explicitly defined number ever published. Rather than drawing networks of the relationships between people on a flat piece of paper as we have done so far, Graham was interested in networks in which the people were sitting on the corners of a cube.

In this picture we can see that for a particular flat diagonal slice through the cube, one that contains four of the corners, all of the edges are red. But not all colourings of a three-dimensional cubes have such a single-coloured slice. Luckily, though, mathematicians also have a way of thinking of higher dimensional cubes. The higher the dimension, the more corners there are: a three-dimensional cube has 8 corners, a four-dimensional cube has 16 corners, a five-dimensional cube has 32 corners and so on. Graham wanted to know how big the dimension of the cube had to be to guarantee that a single-coloured slice exists.

Ronald Graham who gave us his beautiful number. Image: Cheryl Graham.

Graham managed to find a number that guaranteed such a slice existed for a cube of that dimension. But this number, as we mentioned earlier, was absolutely massive, so big it is too big to write within the observable Universe. Graham was, however, able to explicitly define this number using an ingenious notation called up-arrow notation that extends our common arithmetic operations of addition, multiplication and exponentiation.

We can think of multiplication as repeated addition:

3 x 3 = 3+3+3

3^{3} = 3 x 3 x 3.

If we define the single arrow operation, ↑, to be exponentiation, so:

3↑3 = 3^{3} = 3 x 3 x 3 = 27,

then we can define the double-arrow operation ↑↑ to be

3↑↑3 = 3↑3↑3 = 3^{33} = 3^{27} = 7,625,597,484,987.

We can carry on building new operations by repeating previous ones. The next would be the triple-arrow

3↑↑↑3 = 3↑↑3↑↑3 = 3↑↑(3↑↑3)=3↑↑7,625,597,484,987

a tower of powers of 3 that is 7,625,597,484,987 levels high! (See here to read about the up-arrow notation in more detail.)

The number that has come to be known as *Graham's number* (not the exact number that appeared in his initial paper, it is a slightly larger and slightly easier to define number that he explained to Martin Gardner shortly afterwards) is defined by using this up-arrow notation, in a cumulative process that creates power towers of threes that quickly spiral beyond any magnitudes we can imagine.

But the thing that we love about Graham's number is that this unimaginably large quantity isn't some theoretical concept: it's an exact number. We know it's a whole number, in fact it's easy to see this number is a multiple of three because of the way it is defined as a tower of powers of three. And mathematicians have learnt a lot about the processes used to define Graham's number, including the fact that once a power tower is tall enough the right-most decimal digits will eventually remain the same, no matter how matter how many more levels you add to your tower of powers. Graham's number may be too big to write, but we know it ends in seven. Mathematics has the power not only to define the unimaginable but to investigate it too.

### About this article

Rachel Thomas and Marianne Freiberger are the editors of *Plus*. This article is an edited extract from their new book *Numericon: A journey through the hidden lives of numbers*.

## Comments

## Graham’s number is so mind

Graham’s number is so mind boggling that I have reread this article a few times. Doing so today I see I don’t quite understand the Arrow notation. 3^^3=3^(3^3)=3^27. OK

now the question is how does the expansion for different numbers work. if 4^^3=4^(4^4), then is 3^^4=3^((3^3)^3)?

but isn't that 3^(3^(3^3))= 3^^^^3 ?

Basically I thought the number of up arrows controlled the expansion, but now I think I’m wrong.

I’m posting rather than email because i thought others might have the same confusion.

## Grahams Number Arrow Notation

Think the number to the right of the arrow is the exponent: 4^^3 = 4^(3^3) = 4^9 etc.

## These things

What are those things?

## Math

Googolplexitoll, Googolplexigong is larger than googolplex.

We have Kilotar, Dekotar, and a silly number BIG FOOT. That is FOOT(10V100). Omega is even larger than infinity!

I AM JUST IN GRADE 1!

## Math

well it's widespread and popular so it's not that hard to find out about these concepts of "oH wOw i fOuNd tHiS nUmBeR [so on]" sorry if this sounded rude i didn't mean it

## Clarification

4 x 3 = 4 + 4 + 4

4 ^ 3 = 4 x 4 x 4

4 ^^ 3 = 4 ^ 4 ^ 4

4 ^^^ 3 = 4 ^^ 4 ^^ 4

4 ^^^^ 3 = 4 ^^^ 4 ^^^ 4

They all follow the same pattern. For up arrows, you just have one less up arrow than in the original problem.

You are correct that

3 ^^ 4 = 3 ^ 3 ^ 3 ^ 3

However,

3 ^^^^ 3

is actually = 3 ^^^ (3 ^^^ 3)

Working on the parentheses first, you'd find that (3 ^^^ 3) = 3 ^^ (3 ^^ 3)

Again, working on the parentheses, (3 ^^ 3) = 3 ^ 3 ^ 3 = ~7.6 trillion. Put that back in your other problem

and you've got 3 ^^ (~ 7.6 trillion), which means you're doing 3 ^ 3 ^ 3 ^ 3... until you've done it 7.6 trillion times.

Once you get that crazy huge number, you'd put it back in the original problem:

3 ^^^ (crazy huge number).

Which is 3 ^^ 3 ^^ 3 ^^ 3... until you've done it a crazy huge number of times. Unimaginably big. And that's only with only 4 up arrows.

## ...

If 3^^^^3 is called g1 than you get 3 g1 number of ^ 3 and that becomes g2 repeat that until you get g64 and that is one Graham's Number

## Correct

Thanks for posting the correct definition.

People should NOT comment unless they know what they are talking about. If you take a little time and watch Numberphile on YouTube,

you can see Graham himself define the number.

Your explanation was the correct one. Thank you for not saying something stupid.

## Up arrow clarification?

Ok I had the same problem for a while too understanding how arrows worked but it’s actually a rather simple pattern just different from how we’re used to thinking about operations.

Basically the number of arrows tell you the amount of times you repeat the operations that come before it.

Imagine for a second instead of using arrows the (+) sign in addition behaved in the same way the arrows did.

3+3=6

no problems but

(3++3)=(3+(3+3))=3x3=9

If addition behaved exactly like the arrows then

(3+++3)=3^3

And

(3++++3)= 3^^3

Long story short the arrow just tells you to take the process used for the previous number of arrows and use a repeated form of that.

## Mostly correct

3^^4 = 3 ^ ( 3 ^ ( 3 ^ 3 ) )

3^^^^3 = 3 ^^^ ( 3 ^^^ 3 )

## I spot something cool

The fact that in arrow notation my I(x) would equal x⬆️⬆️x+1

## Uhh

3^^4=3^(3^(3^3))=3^(3^27)...

So work on it step by step

Also,3^(3^(3^3))DOESN'T EQAUL3^^^^3

## So 3^^3 is a power tower of

So 3^^3 is a power tower of 3s, 3 high, so 4^^5 is a power tower of 4s, 5 high. 3^^^3 is a power tower feeding frenzy, where there are 3 towers (because of the second three) and they all have the same base number (3, because of the first three). The difference between the towers is the height. The first tower is 3 high (the same as the base number), and once that is multiplied out, that is the HEIGHT of the next one. This continues forth. This also means that 4^^^5 (for example) would be 5 towers of 4s, the first one being 4 high. 3^^^^3 is a power tower feeding frenzy psycho festival, where there are 3 feeding frenzies (because of the second three). Once the final number in the first frenzy is multiplied out, that becomes the NUMBER OF TOWERS in the second frenzy (the first beginning with the height of the base number). This means that our 4^^^^5 example would be 5 frenzies, each with a base number of 4. This doesn't continue onwards in Graham's number (since he made 3^^^^3 into g1) but 3^^^^^3 would be a power tower feeding frenzy psycho festival national celebration, where there are 3 FESTIVALS, each finishing number being the number of frenzies in the next one. It just iterates upwards.

Note: This might not have clarified anything, just wanted to say it to try and help :)

## 12

3^^3 is a power tower of 3s.

4^^5 is a power tower of4s and 5s.

3^^^^^3, 4^^^^5 doesn't count to Graham's number.

Note: Try it:)

## So... what is it?

Great explanation, but I'm somewhat puzzled by the fact that you never actually told us how Graham's number is defined. It's like there's a missing paragraph after you finish explaining the rapid recursive growth of up-arrows.

As I understand it, you start with 3^^^^3,

i.e. 3^^^(3^^^3)

i.e. 3^^(3^^(3^^3))

i.e. 3^^(3^3^3^3^3^3^3...) where "..." continues on for 3^3^3 iterations of powers of three

i.e. 3 raised to the third power a number of times equal to (3^3^3^3^3^3^3^3...) from above

i.e. already an unimaginably large number.

You start with the end result of that, then put that many *up arrows* in between two threes. That is to say that after we just got that huge number result that I can't concisely describe from just 3^^^^3, we look at the number 3^^^^^...3 that has that indescribable number of ^'s in it. That's "Step 1".

Then you do it again; take the number from Step 1, and put *that many* ^'s between two threes. Well beyond numbers anyone can really hope to imagine in any meaningfully representative way without deep mathematical understanding, this completes Step 2.

Graham's Number is the result when we reach Step 64, each of these steps involving putting a number of ^'s equal to the value of the previous step in between two threes.

Anyway, that's what I think an explanation might look like; I'm surprised something like this wasn't included. Otherwise, great explanation,

## Hi. This article, though

Hi. This article, though clarifying Knuth's "Arrow Notation", doesn't get you to Graham's Number. Graham went one step further. To get to G (Graham's Number), one starts with 3^^^^3 (a clearly demonstratedly STOOPID BIG number. However, that number is called "g1". Now, take 3^...^3, where "^...^" is g1 ^'s. That is "g2". Following the pattern, "g3" is made of "g2" ^'s. Are you sitting down? Graham's Number is g64!!!

## ↑

Instead of ^ (which is commonly know as "to the power of") use this ↑.

They are not the same thing.

## Argument

Actual up arrows shouldn't be shown in it because (like you said) they don't mean the same thing. B.T.W (by the way) you just made a argument waiting to happen by saying "They are not the same thing." SO, PEOPLE USE THIS -------> ^!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

JEEZ!!!!!

## Using "^" for the up-arrow

Someone said:

"Instead of ^ (which is commonly know as "to the power of") use this ↑.

They are not the same thing."

Incorrect. When it has been specified that "^" is being used to stand for Knuth's up-arrow, then yes, it becomes the same thing.

Unless a computer keyboard has the up-arrow, it's necessary to substitute something else for it.

A good reason why "^" is a good substitute is the fact that one up-arrow means the same as "^": Exponentiation.

Therefore, "^" is the natural and obvious substitute for the up-arrow, if the computer keyboard doesn't have the up-arrow.

Michael Ossipoff

## Up arrow versus the caret

If it really bothers me to substitute the caret ^ for the up arrow ↑ I just hold the Alt key down and tap 2 then 4 on the numeric keypad then release the Alt key. This produces the character "↑" which looks like an up arrow to me.

## I have something bigger.

Yeah graham's number is huge, but not as big as a googolplexian, which is a one followed by a googolplex number of zeros. In fact, the googolplexian is the largest number that has a name.

## Incorrect

a googleplexianth is 1 followed by a googleplexian zeros. in which grams number is still larger. 3^3 quadrillions of times does in fact add up rather quickly.

## Googolplexian is nothing

Googolplexian is nothing compared to Graham's number since googlplexian is merely 10^10^10^100 while it is already dwarfed by the first iteration for Graham's number (3 ↑↑↑↑ 3 = 3 ↑↑↑ 7,625,597,484,987)

## Studying for my yearly math exam

Man I was curious about googol then I stumbled on googolplex then I noticed it was only the 2nd biggest number according to google then I found out about grahams number bloody hell i f I ever get cocky about my intelligence I'll just think about grahams number and think about how confusing it is man I don't think I'll be able to sleep at night I wish I had just stuct to studying pi multiplied by the radius squared

## Other big numbers

Actually, Graham's number is now considered pretty small by mathematicians. For example, TREE(3) is so big that it makes Graham's number look like pretty much like zero in comparison. The interesting thing about the TREE function is that it grows so rapidly eg.

TREE(1) = 1

TREE(2) = 3

TREE(3) = something insanely big!

## tree3

How does that even work?

## Imagine TREE(TREE(3))

Imagine TREE(TREE(3))

## TREE()

Graham's Number = G

^ = up arrow

Do G ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^ ^^^^G

That number is DEFINITELY bigger than TREE(5)

## Tree(x)

I don't think so, but I didn't count the arrows. Is it G<100>? Big, but I think it doesn't approach Tree(5). See Numberphile -- Tree(G64) for a really fun and technical explanation of where they fall in the infinity system.

This does not count SCG(13), Loader's number, Rayo's number, (Big)Foot's number ... or Busy Beaver.

## grahams number

even tree[treeG1000] is puny to my number

## VERY RIDICULOUS!TREE(3)>>

VERY RIDICULOUS!TREE(3)>>>that number

## SSCG.SSCG(0)=2 SSCG(1)=5 SSCG

SSCG.SSCG(0)=2 SSCG(1)=5 SSCG(2)>3x(2^(3x2^95))=10^(3.5775x10^28) SSCG(3)>>>TREE(3) SSCG(3)>>TREE(TREE(TREE(...(TREE(3))..) TREE(3) times

## grahams number

i have created a number bigger than the puny G64

## Question

How does it work?

## No you are wrong a googleplex

No you are wrong a googleplex^of a googleplex is smaller than graham but larger than googleplex

## a bigger number

i have something bigger it is 10^10^googolplex^10

## Graham Number

Statements such as the universe itself isn't large enough to write down Graham's number would mean more if the font size the writer is using was mentioned. What is the smallest font permitted? How many peas you could put in a bottle depends on the size of the bottle and the size of the pea.

## Graham's Number

If each character was no larger than 1 Planck length, still wouldn't even make a dent.. Absolutely mind dissolvingly, unfathomably, ludicrously large.

## Answer to question about font-size forr writing Graham's number

I'd like to answer to questions:

1. Question: How is Graham's number gotten from the Knuth up-arrow notationi?

Answer: As someone mentioned, here is what Graham's notation means:

(I'm using ^ to mean up-arrow. For exponentiation, ^ and up-arrow mean the same thing.)

g(1) is defined as 3^^^^3

g(n) is defined as 3^^^...^^^3 ...where the number of ^'s written is equal to g(n-1)

That g(n) function increases _very_ rapidly, as n increases.

Graham's number is g(64).

2. Question: What font-size is assumed when it's said that the observable universe isn't big enough to write Graham's number?

Answer: Writing Graham's number as a 1 followed by zeros, suppose you could write one of the zeros in every Planck volume in the observable universe. There aren't enough of them to write it.

If, instead of 1 followed by a string of zeros, you wrote "A trillion trillion trillion...trillion trillion trillion. ...with a long enough string of "trillion" to write Graham's number you'd still need 2/3 as many characters, and so it would still be impossible to write all that string of "trillion", by writing one character in of the Planck volumes in the observable universe,

How small is a Planck volume? It's a hundredth of a millionth of a trillionth of the volume of a proton.

In fact, not only could you not write Graham's number by writing a zero or or a letter of "trillion" in every Planck volume in the universe. It's said that you couldn't even write the number of digits in the number of digits,

...or the number of digits in the number of digits in the number of digits.

...and so on, repeating that number-of-digits thing as many times as the number of Planck volumes in the observable universe.

I'm just quoting something said at Wikipedia. I can't personally guarantee it.

But I can guarantee the first claim: You can't write the Graham number even if you could write a zero, or a letter in "trillion" in each Plank volume of the observable universe,

But that's achievable by much smaller numbers that Graham's number.

How many orders can 200 objects be arranged in? The number is greater than the number of Planck volumes in the universe,

Say you numbered and listed all those orders. How many orders could that list be arranged in? The number of orders for that would be too big to be written even if you could write a zero or a letter of the word "trillion" in every Planck volume in the observable universe

You know that scan-pattern called the QR code, that accesses an advertiser's website? At least one kind of QR code scan pattern uses a 35X35 square pattern of smaller squares

How many combinations of shaded and unshaded squares are there?

There are more than the number of Planck volumes in the observable universe.

In how many orders could the world's human population be arranged? About 10 to the power of 72 billion.

In how many orders could you arrange a number of objects equal to 10 to the 72 billionth power?

That number of orders is about the 400 millionth power of the number of Planck volumes in the observable universe.

Graham's number is incomparably larger than any of these numbers, But those order-numbers can be gotten in a familiar way, ordering a certain number of objects, And it doesn't take many objects (about 200) to have more orders than the number of Planck volumes in the observable universe.

## Maths

"Universe itself isn't large enough to write down Graham's number" This statement hold true irrespective the font size you use.

## Graham's number is so large

Graham's number is so large compared to the size of the universe that the font size actually becomes irrelevant; whether one character takes up a Planck volume or the entire universe barely makes a difference.

## zero ink

Given that we are talking about filling the entire universe with numbers, extremely small numbers, it's not unreasonable, at least not more unreasonable, that we can consider that this 'font' we are talking about has zero thickness and as such there is more than enough space to write any number on the head of a pin.

## Of course you can.

If the font size was 1/grahams number, I'm sure we could squeeze it in there. That's the only use for Graham's number that seems practical anyway.

## Interesting idea, but.....

1/grahams number would be vastly smaller than a Planck length, which is supposedly the shortest/smallest distance that has any meaning (about 10^-20 the size of a proton), so I guess font size couldn't be less than 1 Planck length. And there aren't anywhere near enough Planck units in the entire universe (around 10^186) to make a scratch on grahams number.

But if grahams number is that big, imagine what grahams number raised to the power of grahams number might be?? Then imagine this - there are still an INFINITY of numbers even larger than that!

## really massive but...

try this: graham's number^^^^^grahams number. these things get big... fast.

## Making big numbers

Or you could use a operation of my own design it’s kinda like a hyperoperation but I haven’t seen it officially listed anywhere.

Basically F(n) whatever n is equal to tells you the number of operations used and the level of the last operation you’ll use that step. Ex

F(0)=0

F(1)=1+1=2

F(2)=2•(2+2)

F(3)=3^(3•(3+3))

F(4)=4^^(4^(4•(4+4)))

F(5)= 5^^}(5^^(5^(5•(5+5)))){^^5

basically in that last one there are approximately 5^^85decillion arrows with 5s on either end it’s kinda hard to notate on the phone but it’s already starting to stack in the same way Graham’s Number (G64) does by increasing the actual ammount of arrows. However, it should surpass Graham’s number a good while before F(64) I would imagine and so F(G64) would be absolutely humongous. I built this operation trying to create a fun pattern that would at some point outpace the TREE(n) function but I’ll never be certain if it would work or just how long it would take to grow faster cause TREE(3) is already so massively huge the gap is a VERY difficult one to breach. Like imagine how small 100 is next to G64 and TREE(3) makes G64 look beyond tiny I don’t even fully understand how.

also fun fact I tried calculating this pattern in reverse as well and kinda kept breaking things giving me the following answers before things really stop making any sense at all but it’s still fun to break the rules sometimes just to see what would happen if you could lol

F(-1)=0

F(-2)~ Infinity?

F(-3)~ (i)

F(-4)= DEFINITELY UNDEFINED

## Going "in reverse"

Firstly, that's an odd use of the term 'reverse' when talking about mathematical functions. At any rate, your table of values doesn't even follow from your definition of the function F.

To get F(-1) = 0, I presume you decided to 'invert' the operator, which would make F(-2) = (-2) ÷ [(-2) - (-2)] = -2 ÷ 0, which is undefined (not infinity). Since all subsequent terms will end with a (-x) - (-x) in a denominator, they are ALL undefined.

That being said, I think you have the beginning of an intriguing idea: the *down* arrow for repeated division.

## Already a precedent

Or... you could just use the up arrow and a minus number in the same manner that you do with normal exponents.

A down arrow would make more sense for roots

## What about digital

Could we write the number in digital form, which from my understanding would incredibly expand the number of digits that could possibly be written, or am I mistaken?

## You're right but you're forgetting something...

You're forgetting about the fact that if you consider our universe as a good example of space then you have forgotten that our universe is much smaller than, THE INFINITE AMOUNT of universes in space. Space is believed to be just a vacuum of stars and planets that are grouped together, and that these groups of groups of planets go on seemingly forever. So why are you fighting about fitting it in our universe. When if you tried, you wouldn't actually know when you've reached the outer reaches of our universe. You'd die before you could ever even attempt to record it. So let me put it to you like this, you're fighting about fitting that number into a place that could quite possibly have more universes in it than any number in the known universe could ever come close to being. Think about it like this, it's pretty much like fighting to put a number that can be used to explain how many universes our in existence. There's probably more than a g^g amount of universes in existence so why are you fighting about it, when you couldn't tell if you were in our universe or the one that's two universes over. It's a pointless argument. You're fighting about fitting something that is pretty much infinite into a space that is pretty much infinite. It's like fighting to fit infinity into infinity.